Extronics iCAM501U User Manual download pdf (Page 30)

Operating Manual

Once complete, the camera will power itself off. Simply power it back on as normal (press

and hold the ‘flash enable’ and ‘record enable’ buttons together). It will now be running the

upgraded software.

2.12 Error Codes

• If the iCAM50x has all 3 LEDs constantly flashing it means that it is in an

unrecoverable state. The only way to get it out of this state is to remove the batteries

and then replace them.

Note: If the green status LED continually flashes slowly this does not indicate an error, this

means that the batteries are running low and will soon need replacing.

3 Structure and Function

3.1 Intended Purpose Usage

Important Before setting the unit to work, read the technical documentation

carefully.

Important The latest version of the technical documentation or the corresponding

technical supplements is valid in each case.

The iCAM50x is built using modern components and is extremely reliable in operation;

however it must only be used for its intended purpose. Please note that the intended purpose

also includes compliance with the instructions issued by the manufacturer for installation,

setting up and service.

Any other use is regarded as conflicting with the intended purpose. The manufacturer is not

liable for any subsequent damage resulting from such inadmissible use. The user bears the

sole risk in such cases.

3.2 Transportation and Storage

All iCAM50x devices must be so transported and stored so that they are not subjected to any

excessive mechanical or environmental stresses.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 41 42

No comments

Extronics iCAM501U User Manual Page 30