ATEX Safety Instructions And Getting Started iCAM501U This device complies with p
Operating Manual 2.5.3 Enabling the Audio Recording Feature Once the recording feature is enabled the blue LED will turn on indicating it
Operating Manual Sequence LED 1 LED 2 LED 3 1 2 Off Off Off 3 4 Off Off Off 5 6 Off Off Off Table1LE
Operating Manual 2.5.5 Variable flash brightness The iCAM501U firmware has an additional variable flash brightness feature. The purpose of t
Operating Manual 3 Structure and Function 3.1 Intended Purpose Usage Important Before setting the unit to work, read the technical docum
Operating Manual 3.5 Safety Precautions Important For the installation, maintenance and cleaning of the units, it is absolutely necessary t
Operating Manual 4 Technical Data Certification Number ITS09ATEX26868X, IECEx ITS 09.0027X ATEX Certification II 1 G Ex ia IIB T4 Ga, II 2
Operating Manual 5 EC Declaration of Conformity 16
Operating Manual This page is intentionally left blank. Document Number 331916 Revision 01 (
Operating Manual Contents 1 Safety Information and Notes... 4
Operating Manual 1 Safety Information and Notes 1.1 Storage of this Manual Keep this user manual safe and in the vicinity of the device. Al
Operating Manual 2 User Guide 2.1 Changing/Installing Batteries To change or install the batteries in the iCAM501U turn the screw as indicat
Operating Manual 2.2 Preparing for first use The iCAM501U is shipped with a protective film fitted to the front and rear windows. This sho
Operating Manual 2.3 Powering On / Off Information The iCAM501U must be fully powered on before plugging a USB cable into the camera or t
Operating Manual camera is first used.. The time and date must be set using a PC via the USB interface. To set the time and date of the camer
Operating Manual 2.5.2 Enabling the Flash Once the flash button is pressed the red LED will start to flash, after some seconds the LED wil
Comments to this Manuals